search button

Operator Accessories 

Accessories for RSX®

Auxiliary Output Module

This plug-in module will provide several auxiliary sets of dry contacts that are microprocessor controlled. Outputs can be configured using the on-board keypad.

To maintain compliance when using a sensing edge as a primary safety device with our X-Series commercial operators labeled UL 325 2010, you must use one of the following modules:

Timer to Close Module

The Timer to Close Module provides auxiliary control inputs, auxiliary safety inputs, auxiliary timer hold input, and an automatic door closing feature with a user-selectable time-delay. Safety inputs can be enabled or disabled using the on-board keypad. A sensing device must be used with this module.

Monitored Edge Interface Module

The Monitored Edge Interface Module provides an interface between two-wire monitored sensing edges and our X-Series operators. This module allows for the connection of a two-wire monitored sensing edge to be connected to the ODC STB terminals. Compatible for use on Miller Edge electronic two-wire monitored edge models ME, MT and MU.


Transmitters



Transmitters

The RSX® and RHX® operators feature a built-in Radio Receiver System that can store up to 250 transmitters, giving the customer the ability to identify which transmitters have been operating the door. Radio transmitters may be single-button, two-button, three-button, four-button, or Open/Close/Stop. They are easily programmed or erased using the LCD display. The patented CodeDodger® technology cycles between 315 and 390 MHz with the touch of a button.


Motors


Motors

The following motors are available when specified:
Totally Enclosed Non Ventilated (TENV)
Totally Enclosed Fan Cooled (TEFC).


Sensing Devices


Bottom Sensing Edge

stop and reverses the door upon contact with an obstruction.

Safe-T-Beam®

senses an obstruction and signals the operator to stop or reverse the door. Commercial Photo Eye Kit® - metal enclosure further protects Safe-T-Beam® photo eyes from damage.

VITECTOR® NEMA 4/4X OPTOEYE

is a set of infrared transmitter and receiver safety sensors constructed of durable materials to withstand the toughest environments including commercial and industrial applications.

Monitored Retro-reflective Photo-eye

This photo-eye utilizes interference reduction technology, that enables further reduction of interference from reflective surfaces.
Share This Web Page: