Sign In

Fire-Rated Service Doors 630

​​​​​​​​fire door on building​​​​​​​

​​​​​​​​​​​​​FireKing® Model​​ 630​

These fire-rated rolling steel doors offer superior protection wherever a listed fire door is required. Common applications include factories, warehouses, mills, distribution centers and parking garages. Customized fire doors are available for conveyor openings. These doors feature fusible links mounted on both sides of the wall that separate to automatically close the door. UL recommends a 165º F (74º C) fuse link for ambient conditions for 100º F (38º C) or less, or a 212º F (100º C) fuse link for ambient conditions over 100º F (38º C).

​Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes. ​

​​Fire-Rated Door 630 Mounting Chart

fire door mounting chart

​​
Slat selection and finishes

Fire door slats are available in curved or flat profile in either galvanized or stainless steel. Galvanized slats are finished with a rust-inhibitive, roll-coating process that incorporates baked-on prime paint, and a baked-on polyester top coat of gray, tan, white or brown. Stainless steel slats are manufactured with a No. 4 brushed finish.​​​​

Features

Features

Standard max width
41’2” (12548 mm) 

Standard max height
25’4” (7722 mm)​

Curtain
Painted galvanized / stainless steel
Slat profile available in curved or flat.​
Standard finish available in gray, tan, white or brown

Guides
Three structural steel angles. 
PowderGuard® Weathered finish with black powder coat.

Labels available for masonry or non-masonry applications
UL/ULC 1-1/2 hr (FM is optional)
UL/ULC 3 hr (FM is optional)
UL oversized door (FM is optional)

Mechanical auto resettable hoist (non-motorized)
Enables easy drop test and reset of fire door in seconds

Fusible link for added safety
Separates at 165°F (74°C) to automatically close the door in case of fire

Viscous governor technology
Controls rate of door descent during a fire while reducing noise and vibration for quieter door operation

Innovative planetary gear design
Ensures years of reliable service and drop-out performance

Warranty
2-year material and workmanship

Fire doors are in compliance with:
National Fire Protection Association (NFPA-80)
Underwriters Laboratories (UL & ULC)
New York City (MEA)
State of California (CSFM)

Door Options

Door Options​​​

  • Factory Mutual (FM) label optional
  • Operation: push-up, chain hoist, crank and electric motor (RHX® or RSX®)
  • Fire Sentinel® time-delay release device
  • FireLite® vision lites
  • UL-listed brush-type smoke seals
  • Flame baffle system (required for FM label)
  • Smoke detectors
  • Horns and horns with strobes
  • Cylinder locking bottom bar with mortise cylinder
  • Wind load (FBC, TDI, Miami-Dade) 
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes​
Colors
​​​​

Colors

Standard Exterior Color

  • white color swatch White
  • gray color swatch Gray
  • tan color swatch Tan
  • brown color swatch Brown​​​

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door Distributor.


Powder Coat Color Options

​PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Weathered finish, a thicker, industrial textured powder coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.​

Powder Guard color options​​​

Support Documents