search button

Model 790CW 

rolling steel sheet door

When your project requires a door that can handle high wind load conditions, yet is attractive, versatile and economical, the Model 790CW fits the job. This rolling sheet door (790) is rated for a design pressure from 22/-22psf (for a 20’0” wide door) to 41/-41psf (for a 10’0” wide opening), and can be built up to 16’0” tall. The 790CW is available in 11 standard colors.

Fabricated of high strength, 26-gauge galvanized steel curtain sections, 14-gauge universal guides, and steel bottom bar angle, the 790CW is a strong and durable door. With quick-connect components, universal through-hole guide design, and unique curtain profile and stepped counterbalance rings that minimize nesting, the 790CW is designed for fast installation, smooth operation and low maintenance, too.

Door Options

Exterior Colors



Royal Blue

Forest Green

Dark Teal

Walnut Brown

Garnet Red

Glossy White

Polar Blue

Desert Tan



Additional Options

  • Electric operator (Model RMX®)
  • Chain hoist with reduced drive, non-handed quick-connect components (standard on some 790CW doors, depending upon size)
  • Dual exterior curtain slide bolt lock
  • Jamb extension brackets for steel/wood jambs
  • Header draft seal


Max. standard width
20' (6096 mm)

Max. standard height
16' (4877 mm)

26-gauge, roll-formed galvanized steel sections interlocked and seamed to form full-door height with curtain windlocks

Curtain material
High strength steel

Curtain rub strips
PVC on both front edges

Assembly 12" (305 mm), steel “stepped” rings to minimize headroom and enhance door operation

Wind load
Integrated curtain windlocks and guide to withstand wind loading to minimum design pressures of 22/-22 psf (107/-107 kgf/sq m)

Universal guides
14-gauge, roll-formed galvanized steel with pre-punched through-hole design for mounting to concrete, masonry, steel or wood jambs

11-gauge steel

Bottom bar
Extruded aluminum reinforced with steel, roll-formed angles

Bottom bar stops 12-gauge galvanized steel

Bottom seal
Bulb-type, astragal seal

Polypropylene strips on both edges

Standard springs
3 3/8" (86 mm) torsion springs

Manual or “non-handed” reduced drive chain hoist (depending on door size) with quick-connect components

Interior bottom bar slide bolt on each end of bottom bar assembly

Exterior/interior finish
Paint finish in choice of 11 standard colors: white, glossy white, garnet red, royal blue, polar blue, forest green, desert tan, dark teal, teal, walnut brown and bronze

Support Documents

Share This Web Page: